[Documentation] [TitleIndex] [WordIndex

Package Summary

The numatac_can_driver package

Overview

The numatac_can_driver package provides a ROS interface to NumaTac tactile sensors over a CAN interface. See product manual for details.

Bring-up

To bring up the NumaTac tactile sensors, plug in the USB connector. Configure the CAN interface by running the following command in a command line prompt:

sudo ip link set can0 type can bitrate 1000000

and finally bring-up the CAN interface using:

sudo ifconfig can0 up

To run the driver use:

roslaunch numatac_can_driver numatac_can_driver.launch

ROS API

numatac_can_node

Publishes an array of containing each fingers sensor readings of fluid and dynamic pressure in Pa.

Published Topics

hand_pressure (numatac_can_driver/HandPressure)

Parameters

~canbus_dev (string, default: can0) ~number_of_sensors (int, default: 3) ~tare (bool, default: false)


2019-10-12 12:52