[Documentation] [TitleIndex] [WordIndex

  Show EOL distros: 

rosserial: rosserial_arduino | rosserial_client | rosserial_msgs | rosserial_python | rosserial_xbee

Package Summary

rosserial_xbee provides tools to do point to multipoint communication between rosserial nodes connected to an xbee. All of the nodes communicate back to a master xbee connected to a computer running ROS. This software currently only works with Series 1 Xbees. This pkg includes python code from the python-xbee project: http://code.google.com/p/python-xbee/

rosserial: rosserial_arduino | rosserial_client | rosserial_embeddedlinux | rosserial_msgs | rosserial_python | rosserial_xbee

Package Summary

rosserial_xbee provides tools to do point to multipoint communication between rosserial nodes connected to an xbee. All of the nodes communicate back to a master xbee connected to a computer running ROS. This software currently only works with Series 1 Xbees. This pkg includes python code from the python-xbee project: http://code.google.com/p/python-xbee/

rosserial: rosserial_arduino | rosserial_client | rosserial_embeddedlinux | rosserial_msgs | rosserial_python | rosserial_xbee

Package Summary

rosserial_xbee provides tools to do point to multipoint communication between rosserial nodes connected to an xbee. All of the nodes communicate back to a master xbee connected to a computer running ROS. This software currently only works with Series 1 Xbees. This pkg includes python code from the python-xbee project: http://code.google.com/p/python-xbee/

rosserial: rosserial_client | rosserial_msgs | rosserial_python

Package Summary

rosserial_xbee provides tools to do point to multipoint communication between rosserial nodes connected to an xbee. All of the nodes communicate back to a master xbee connected to a computer running ROS. This software currently only works with Series 1 Xbees. This pkg includes python code from the python-xbee project: http://code.google.com/p/python-xbee/

Package Summary

rosserial_xbee provides tools to do point to multipoint communication between rosserial nodes connected to an xbee. All of the nodes communicate back to a master xbee connected to a computer running ROS. This software currently only works with Series 1 Xbees. This pkg includes python code from the python-xbee project: http://code.google.com/p/python-xbee/

Package Summary

rosserial_xbee provides tools to do point to multipoint communication between rosserial nodes connected to an xbee. All of the nodes communicate back to a master xbee connected to a computer running ROS. This software currently only works with Series 1 Xbees. This pkg includes python code from the python-xbee project: http://code.google.com/p/python-xbee/

Package Summary

rosserial_xbee provides tools to do point to multipoint communication between rosserial nodes connected to an xbee. All of the nodes communicate back to a master xbee connected to a computer running ROS. This software currently only works with Series 1 Xbees. This pkg includes python code from the python-xbee project: http://code.google.com/p/python-xbee/

Package Summary

Allows multipoint communication between rosserial nodes connected to an xbee. All nodes communicate back to a master xbee connected to a computer running ROS. This software currently only works with Series 1 Xbees. This pkg includes python code from the python-xbee project: http://code.google.com/p/python-xbee/

Package Summary

Allows multipoint communication between rosserial nodes connected to an xbee. All nodes communicate back to a master xbee connected to a computer running ROS. This software currently only works with Series 1 Xbees. This pkg includes python code from the python-xbee project: http://code.google.com/p/python-xbee/

Package Summary

Allows multipoint communication between rosserial nodes connected to an xbee. All nodes communicate back to a master xbee connected to a computer running ROS. This software currently only works with Series 1 Xbees. This pkg includes python code from the python-xbee project: http://code.google.com/p/python-xbee/

rosserial_xbee provides a simple way to wirelessly connect custom sensors and actuators to ROS. It creates a point to multi-point network using XBees. Each hardware node uses an XBee and a microcontroller running rosserial to communicate to a network coordinator XBee connected to a ROS computer.

rosserial_network.jpg

Example network diagram. Each hardware node could be a separate temperature sensor, rfid reader, ultrasounic ranger, clap detector, etc...

Using rosserial_xbee, you can set up a network of sensors around your home to report back to ROS or just use it to wirelessly control a homebrew robot.

There are two main tools provided : setup_xbee.py and xbee_network.

setup_xbee.py

setup_xbee.py is configuration script for Xbees. It takes factory fresh xbee and programs it to work with your rosserial network. If XBee is not factory fresh, use Digi's X-CTU software to program it.

./setup_xbee.py [options] port my_adr

    port :    serial port of port of the xbee (/dev/ttyUSB0)
    my_adr:   MY address is the 16 bit address of this xbee in the
              network. This must be a unique address in the network.
              This address is always 0 for the coordinator.

Options:
  -h, --help            show this help message and exit
  -P PAN_ID, --pan_id=PAN_ID
                        Pan ID of the xbee network.  This ID must be the same
                        for all XBees in your network.
  -c CHANNEL, --channel=CHANNEL
                        Frequency channel for the xbee network. The channel
                        value must be the same for all XBees in your network.
  -C, --coordinator     Configures the XBee as Coordinator for the network.
                        Only make the XBee connected to the computer a
                        coordiantor

xbee_network.py

This node connects to the master xbee, takes the rosserial communication from all of the rosserial devices and forwards it to the rest of ROS. It subscribes / publishes any topic requested by its hardware nodes

./xbee_network.py <xbee_serial_port> ID1 [ ID2 ID3 ....]

To run xbee_network.py, supply as arguments to the scrip the xbee's serial port and the ID # of all of the hardware node xbees. These IDs were programed into the xbee using setup_xbee.py or Digi's X-CTU software.


2019-12-07 13:05