[Documentation] [TitleIndex] [WordIndex

Only released in EOL distros:  

rail_youbot: rail_youbot_description | rail_youbot_launch | rail_youbot_teleop

Package Summary

A set of launch files that are useful when launching the Kuka youBot.

About

This package contains a useful launch file that can be used on a Kuka youBot to launch its motors, a Kinect sensor, load the robot description, and start the state publisher. This package will load the URDF found in the rail_youbot_description package as its robot description.

Installation

Before installing the rail_youbot stack, be sure to install the necessary dependencies. Instructions on installing the various youBot packages can be found in this tutorial.

To install the rail_youbot stack, simply run the following commands in your shell:

This will ensure all dependencies are met and that the package is ready for use.

Startup

This package contains a rail_youbot.launch file which should require no modifications for use you your youBot. To start the script, run the following command on your robot:

Remote ROS Core

In some cases you may want to run on off-board roscore server. If this is the case, you need to tell ROS to do so before launching the above file. In the ~/.bashrc file on your robot, add the following lines (replacing the parts in < > with the appropriate information.

After saving the file, reload your .bashrc file with the following command:

Now, when launching the launch file above, the robot will communicate with a remote roscore instead of its own local roscore.

Support

Please send bug reports to the GitHub Issue Tracker. Feel free to contact me at any point with questions and comments.


wpi.png

rail.png


2024-11-02 14:40